We hebben het momenteel erg druk. Houd er rekening mee dat bestellingen binnen 4 tot 5 werkdagen worden verzonden in plaats van de gebruikelijke 1 dag.
A triple monitor stand that has no connection to your rig, so your monitors are completely free of any vibration your wheel base might generate. It's available in various configurations:
8040 Frame.
- The monitors are supported by bigger 8040 profiles.
- Added rigidity and reduced sag for the side monitors.
- Supports 3x 27, 32, 42 and 34 inch Ultrawides.
4040 Frame.
- The monitors are supported by lighter 4040 profiles.
- Cost efficient design, ideal for smaller and lighter monitors.
- Works great with 3x 24 inch and 27 inch monitors.
HIGHLY ADJUSTABLE
While the usual angle of your side monitors is around the 60 degree mark, our Triple Stands can be adjusted between 25 and 90 degrees, so you will never run out of options. The side arms are supported by two 5mm thick steel plates that lock the side monitors, so you won't lose you're setup if you bump into them.
The Standard VESA brackets support some height- and tilt adjustment. The Easy Alignment Kit gives you 6 degrees of monitor position fine-tuning, meaning you will always have your monitors perfectly aligned.
The monitors can be placed as low as 0 cm, and as high as 125 cm from the ground.
If you want to know more about the differences between our monitor mounting options, please read our blog post Unified vs. Free Standing monitor mounts.
What you get.
- A freestanding triple monitor mount.
- All mounting material included.
- M4 spacers included.
Compatibility.
- Monitors with VESA pattern 75x75 or 100x100.
- Up to 42 inch (8040 frame).
Tools needed.
- Allen key 6, 5 and 4mm.
- Screw driver.
- Spirit level.
