This accessory consists of two mounting plates, each with four long slotted holes measuring 175 or 80 mm in length, in M4, M5, M6, and M8. By flipping both plates or sliding them apart, you can create your own hole pattern, meaning maximum compatibility with shifters, handbrakes and flight sim gear currently on the market.
The plates are mirrored off each other, so that the 'variable length' can be made as small as possible.
They are made from 5 mm thick powder coated steel, and can be fit in multiple ways on our Shifter Frame. It's the ideal accessory for when the Shifterplate is not sufficient enough.
Mounting material to mount the plates to your rig or shifter frame is included.
Material to mount peripheral equipment is not included.
The Long Plates.
5 mm thick powder coated steel.
Total size of one plate = 205 x 80 mm.
Slot length = 175 mm in M8, M6, M5 and M4.
The Short Plates.
5 mm thick powder coated steel.
Total size of one plate = 110 x 80 mm.
Slot length = 80 mm in M8, M6, M5 and M4.
What you get.
- A left and right mounting plate.
- Mounting material to mount the plates.
Compatibility.
- Aluminum profiles with 8 mm slots.
- Goes well with our Shifter Frame.
Tools needed.
- Allen key 6 mm.
